Join Regular Classroom : Visit ClassroomTech

Fill The Cube | CodeVita Solutions | Codewindow.in

Problem Description

A company manufactures walls which can be directly implanted at the site. The company uses small square bricks of material C and material D which have similar looks but have huge difference in quality. The company manufactures walls of square shapes only to optimize their costs. A novice employee created a square wall using bricks of material C and D. However, the client had asked the wall to be made of only high-qualitymaterial-materialC. To solve this problem, they will place the wall in a special furnace and heat it such that the material D melts and only material C remains. Material C brick will move down due to gravity if a material D brick below it melts. The new empty space created will be filled by new material C square walls. They also want to use biggest possible C square wall while building the final wall. For this they will position the wall in the furnace in an optimal way i.e. rotate by 90-degrees any number of times, if required, such that the biggest space possible for new material C wall is created. No rotations are possible when the furnacestartsheating. Given the structure of the original wall created by the novice employee, you need to find out the size of the new C square wall which can be fitted in the final wall which will be delivered to the client.

Constraints

1<N<100

Input

First Line will provide the size of the original wall N. Next N lines will provide the type of material (C and D) used for each brick by the novice employee. 

Output

Size of the biggest possible C square wall which can be fitted in the final wall.

TimeLimit

1

Examples

Example 1

Input

4

CDCD

CCDC

DDDD

CDDD

Output

3

Explanation

If the wall is placed with its left side at the bottom, space for a new C wall of size 2×2 can be created.This can be visualized as follows:

DCDD

CDDD

DCDD

CCDC

The melted bricks can be visualized as follows

—-

-C–

CC–

CC-C

Hence, the  maximum wall size that can be replaced is 2×2. If the wall is placed as it is with its original bottom side at the bottom, space for a new C wall of size 3×3 can be created. Post melting, this can  be visualized as follows.

—-

C—

C—

CCCC

Hence, the maximum wall size that can be replaced is 3×3 in this approach. Since no rotations followed by heating is going to a yield a space greater than 3×3,the output is 3. 

Example 2

Input

7

CDDCDDD

CDDCDDD

DDDDDDC

DCDCDDD

DDDCDCD

CDDCDCC

CDCDCCC

Output

5

Explanation

If the wall is placed with its left side at the bottom, a space for new C wall of size 5×5 can be created. This can be visualized as follows

DDCDDCC

DDDDCCC

DDDDDDC

CCDCCCD

DDDDDDC

DDDCDDD

CCDDDCC

When this orientation of the wall is heated, a space for new C wall of size 5×5 is created after the D bricks melt

_______

_______

______C

______C

_____CC

CC_CCCC

CCCCCCC

Whereas, if the rotation was not done, the wall formed after the D bricks melt will be as follows

_______

_______

___C___

C__C___

C__C__C

C__C_CC

CCCCCCC

When this orientation of the wall is heated, a space for new C wall of size 3×3 only is created after the D bricks melt Hence rotation is important and correct answer is 5×5 Since no rotations followed by heating is going to a yield a space greater than 5×5,the output is 5.

coming soon..
Categories
Pages
Recent Posts